24
display gvrp statistics
Syntax
View
Parameter
Description
Example
GVRP C
ONFIGURATION
display gvrp statistics [ interface interface-list ]
Any view
interface interface-list: Specifies an Ethernet port list, in the format of
{ interface-type interface-number [ to interface-type interface-number ] }&<1-10>,
where &<1-10> indicates that you can specify up to 10 port ranges. A port range
defined without the to interface-type interface-number portion comprises only
one port.
Use the
display gvrp statistics
specified or all trunk ports.
Note that if the interface interface-list is not provided, the GVRP statistics of all
trunk ports will be displayed. Otherwise, only the GVRP statistics of all the
specified trunk port will be displayed.
# Display statistics about GVRP for trunk port Ethernet 1/0.
<Sysname> display gvrp statistics interface ethernet 1/0
GVRP statistics on port Ethernet1/0
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
Table 54 Description on the fields of the display gvrp statistics command
Field
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
C
command to display GVRP statistics of the
Description
Indicates whether GVRP is enabled or disabled.
Indicates whether GVRP is running.
Indicates the number of GVRP registration failures.
Indicates the source MAC address in the last GVRP PDU.
Indicates the GVRP registration type on the port.
OMMANDS
: Enabled
: YES
: 0
: 0000-0000-0000
: Normal