Display Ipv6 Host - H3C S3100 Series Command Manual

Table 1-2 Description on the fields of the display ipv6 fib command
Total number of Routes
Destination
PrefixLength
NextHop
Flag
TimeStamp
Interface

display ipv6 host

Syntax
display ipv6 host
View
Any view
Parameters
None
Description
Use the display ipv6 host command to display the mapping between host name and IPv6 address.
Related commands: ipv6 host.
Examples
# Display the mapping between host name and IPv6 address.
<Sysname> display ipv6 host
Host
SWB
Table 1-3 Description on the fields of the display ipv6 host command
Host
Age
Flags
IPv6Address (es)
Field
Age
0
Field
Total number of routes in the FIB
Destination address to which a packet is forwarded
Prefix length of the destination address
Next hop address when a packet is forwarded to the destination
Route flag:
"U" — Usable route
"G" — Gateway route
"H" — Host route
"B" — Blackhole route
"D" — Dynamic route
"S" — Static route
Generation time of an FIB entry
Interface from which a packet is forwarded
Flags IPv6Address (es)
static 2002::1
Host name
Time for the entry to live, displayed as 0 in the case of static
configuration.
Flag indicating whether the entry is configured statically or acquired
dynamically
IPv6 address corresponding to a host name
1-7
Description
Description