Display Ipv6 Host - H3C s3100 series Command Manual

Flag
TimeStamp
Interface

display ipv6 host

Syntax
display ipv6 host
View
Any view
Parameters
None
Description
Use the display ipv6 host command to display the mapping between host name and IPv6 address.
Related commands: ipv6 host.
Examples
# Display the mapping between host name and IPv6 address.
<Sysname> display ipv6 host
Host
SWB
Table 1-3 Description on the fields of the display ipv6 host command
Host
Age
Flags
IPv6Address (es)
Field
Route flag:
"U" — Usable route
"G" — Gateway route
"H" — Host route
"B" — Blackhole route
"D" — Dynamic route
"S" — Static route
Generation time of an FIB entry
Interface from which a packet is forwarded
Age
0
Field
Host name
Time for the entry to live, displayed as 0 in the case of static
configuration.
Flag indicating whether the entry is configured statically or
acquired dynamically
IPv6 address corresponding to a host name
Flags IPv6Address (es)
static 2002::1
1-6
Description
Description