Display Ipv6 Host - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
TimeStamp
Interface
Table 1-3 Description on fields of the display ipv6 fib command
Total number of Routes
Destination
PrefixLength
NextHop
Flag
Label
Tunnel ID
TimeStamp
Interface

1.1.4 display ipv6 host

Syntax
display ipv6 host
View
Any view
Parameters
None
Description
Use the display ipv6 host command to display the mappings between host names
and IPv6 addresses in the static DNS database.
: Date- 8/29/2007, Time- 10:11:42
: InLoopBack0
Field
Total number of routes in the FIB
Destination address to which a packet is to be
forwarded
Prefix length of the destination address
Next hop of the route to the destination
Route flag:
U — Usable route
G — Gateway route
H — Host route
B — Black hole route
D — Dynamic route
S — Static route
Label
ID of a tunnel
Generation time of a FIB entry
Outgoing interface that forwards packets
Chapter 1 IPv6 Basics Configuration Commands
Description
1-4