Ipv6 Netstream Export Host - H3C SR6600 Command Reference Manual

Network management and monitoring command reference
Hide thumbs Also See for SR6600:
Table of Contents

Advertisement

Default command level
3: Manage level
Parameters
as: Specifies the AS aggregation by source AS number, destination AS number, inbound interface index,
and outbound interface index.
bgp-nexthop: Specifies the BGP nexthop aggregation by BGP next hop IPv6 address, and outbound
interface index.
destination-prefix: Specifies the destination-prefix aggregation by destination AS number, destination
address mask length, destination prefix, and outbound interface index.
prefix: Specifies the source and destination prefix aggregation by source AS number, destination AS
number, source address mask length, destination address mask length, source prefix, destination prefix,
inbound interface index, and outbound interface index.
protocol-port: Specifies the protocol-port aggregation by protocol number, source port, and destination
port.
source-prefix: Specifies the source-prefix aggregation by source AS number, source address mask length,
source prefix, and inbound interface index.
Usage guidelines
In IPv6 NetStream aggregation view, you can perform the following tasks:
Enable or disable the specific IPv6 NetStream aggregation.
Configure the source interface, destination IP address, and destination port for IPv6 NetStream
data export.
Examples
# Set the IPv6 NetStream aggregation mode as AS, and enter the NetStream AS aggregation view.
<Sysname> system-view
[Sysname] ipv6 netstream aggregation as
[Sysname-ns6-aggregation-as]
Related commands
enable

ipv6 netstream export host

ipv6 netstream export source
ipv6 netstream export host
Use ipv6 netstream export host to set the destination address and destination UDP port number for IPv6
NetStream data export.
Use undo ipv6 netstream export host to delete the specified export address or all export addresses that
are configured in this view.
Syntax
ipv6 netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ipv6 netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]
Default
194

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr6600-x

Table of Contents