Display L2Vpn Mac-Address - H3C CR16000-F Command Reference Manual

Errors
Discards: 0
Output Statistics:
Octets
Packets : 0
Errors
Discards: 0
Table 4 Command output
Field
Interface
Owner
Link ID
State
Type
DF State
Statistics
Input Statistics
Output Statistics
Related commands
display l2vpn service-instance

display l2vpn mac-address

Use display l2vpn mac-address to display L2VPN MAC address entries.
Syntax
display l2vpn mac-address [ interface interface-type interface-number
[ service-instance instance-id ] | vsi vsi-name [ ac ] ] [ dynamic ] [ count ]
: 0
: 0
: 0
Description
Layer 3 interface name.
VSI name.
The interface's link ID on the VSI.
Physical state of the interface:
•
Up—The interface is physically up.
•
Down—The interface is physically down.
L2VPN type of the interface. This field displays VSI for the VXLAN feature.
Whether the device is the designated forwarder for the AC at a multihomed
EVPN site:
•
BDF—The device is a backup designated forwarder.
•
DF—The device is the designated forwarder.
This field is not displayed if no Ethernet segment identifiers are configured on
the interface.
Packet statistics state:
•
Enabled—The packet statistics feature is enabled for the interface.
•
Disabled—The packet statistics feature is disabled for the interface.
Incoming traffic statistics:
•
Octets—Number of incoming bytes.
•
Packets—Number of incoming packets.
•
Errors—Number of error packets.
•
Discards—Number of dropped packets.
Outgoing traffic statistics:
•
Octets—Number of outgoing bytes.
•
Packets—Number of outgoing packets.
•
Errors—Number of error packets.
•
Discards—Number of dropped packets.
7