Display L2Vpn Mac-Address - H3C MSR 810 Command Reference Manual

Field
Type

display l2vpn mac-address

Use
display l2vpn mac-address
Syntax
display l2vpn mac-address [ vsi vsi-name ] [ dynamic ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi vsi-name
specify a VSI, this command displays MAC address entries for all VSIs.
: Specifies dynamic MAC address entries learned in the data plane. If you do not specify
dynamic
this keyword, the command displays all MAC address entries, including:
•
Dynamic remote- and local-MAC entries.
•
Remote-MAC entries advertised through BGP EVPN.
•
Manually added static remote-MAC entries.
•
Remote-MAC entries issued through OpenFlow.
VXLAN does not support static local-MAC entries.
: Displays the number of MAC address entries. If you do not specify this keyword, the
count
command displays detailed information about MAC address entries.
Examples
# Display MAC address entries for all VSIs.
<Sysname> display l2vpn mac-address
MAC Address
0000-0000-000b
0000-0000-000c
0000-0000-000d
--- 3 mac address(es) found
# Display the total number of MAC address entries in all VSIs.
<Sysname> display l2vpn mac-address count
3 mac address(es) found
Table 4 Command output
Field
State
Description
•
Down—The interface is physically down.
L2VPN type of the interface. This field displays VSI for the VXLAN feature.
: Specifies a VSI name, a case-sensitive string of 1 to 31 characters. If you do not
State VSI Name
Static vpn1
Dynamic vpn1
Dynamic vpn1
---
Description
Entry state:
•
Dynamic—Local- or remote-MAC entry dynamically learned in the data plane.
to display MAC address entries for VSIs.
6
Link ID/Name Aging
Tunnel10 NotAging
Tunnel60 Aging
Tunnel99 Aging