Display Fib Ip-Address - H3C S3100-52P Command Manual

Command Manual – IP Address and Performance Configuration
H3C S3100-52P Ethernet Switch
Flag
TimeStamp
Interface

2.1.2 display fib ip-address

Syntax
display fib ip-address1 [ { mask1 | mask-length1 } [ ip-address2 { mask2 |
mask-length2 } | longer ] | longer ]
View
Any view
Parameter
ip-address1, ip-address2: Destination IP addresses, in dotted decimal notation.
ip-address1 and ip-address2 together define an address range. The FIB entries in this
address range will be displayed.
mask1, mask2: IP address masks, in dotted decimal notation.
mask-length1, mask-length2: Integers in the range of 0 to 32, representing the mask
length.
longer: Displays the FIB entries matching specific network/mask.
Description
Use the display fib ip-address command to view the FIB entries matching the specified
destination IP address. Each line indicates an FIB entry. The information includes:
destination address/mask length, next hop, current flag, timestamp, and outbound
interface.
Field
Flags:
U: A route is up and available.
G: Gateway route
H: Local host route
B: Blackhole route
D: Dynamic route
S: Static route
R: Rejected route
E: Multi-path equal-cost route
L: Route generated by ARP or ESIS
Timestamp
Forwarding interface
Chapter 2 IP Performance Configuration
Description
2-2
Commands