Aaa & Radius & Hwtacacs Configuration Example; Remote Radius Authentication Of Telnet/Ssh Users - H3C S7500 Series Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Delete the buffered
no-response
stop-accounting request
packets
Clear the statistics about
the RADIUS protocol
Table 1-32 Display and maintain HWTACACS protocol information
Display the configuration
or statistic information
about one specific or all
HWTACACS schemes
Display the buffered
HWTACACS
stop-accounting request
packets that are not
responded to
Clear the statistics about
the TACACS protocol
Delete the buffered
stop-accounting request
packets that are not
responded to
1.7 AAA & RADIUS & HWTACACS Configuration Example

1.7.1 Remote RADIUS Authentication of Telnet/SSH Users

Note:
The configuration procedure for the remote authentication of SSH users through
RADIUS server is similar to that of Telnet users. The following description only takes
the remote authentication of Telnet users as example.
To do...
To do...
display hwtacacs
[ hwtacacs-scheme-name [ statistics] ]
display stop-accounting-buffer
{ hwtacacs-scheme
hwtacacs-scheme-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
reset hwtacacs statistics
{ accounting | authentication |
authorization | all }
reset stop-accounting-buffer
{ hwtacacs-scheme
hwtacacs-scheme-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
Chapter 1 AAA & RADIUS & HWTACACS
Use the command...
reset stop-accounting-buffer
{ radius-scheme
radius-scheme-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
reset radius statistics
Use the command...
1-40
Configuration
Remarks
You can
execute the
reset
command in
user view
Remarks
You can
execute the
display
command in
any view
You can
execute the
reset
command in
user view