Reset Acl Ipv6 Counter - H3C MSR 20-20 Command Reference Manual

Description
Example

reset acl ipv6 counter

Syntax
View
Parameter
2000 to 2999 for basic IPv6 ACLs
■
3000 to 3999 for advanced IPv6 ACLs
■
10000 to 42767 for simple IPv6 ACLs
■
all: All IPv6 ACLs.
name acl6-name: Specifies the name of the ACL, which is a case insensitive string
of 1 to 32 characters. It must start with an English letter and cannot be the English
word of all to avoid confusion.
Use the display acl ipv6
IPv6 ACLs.
The output will be displayed in matching order.
# Display information about IPv6 ACL 2001.
<Sysname> display acl ipv6 2001
Basic IPv6 ACL 2001, named flow, 1 rule,
Acl's step is 5
rule 0 permit source 1::2/128 (0 times matched)
rule 0 comment This rule is used in eth 1
Table 550 Description on the fields of the display acl ipv6 command
Field
Basic IPv6 ACL 2001
named flow
1 rule
Acl's step is 5
5 times matched
rule 0 comment This rule is used
in eth 1
reset acl ipv6 counter { acl6-number | all | name acl6-name }
User view
all: All basic and advanced IPv6 ACLs.
acl6-number: IPv6 ACL number. It is a value in one of the following ranges:
2000 to 2999 for basic IPv6 ACLs
■
3000 to 3999 for advanced IPv6 ACLs
■
command to display information about specified or all
Description
The displayed information is about the basic IPv4 ACL 2001.
The name of the ACL is flow.
The ACL contains one rule.
The rules in this ACL are numbered in steps of 5.
Five matches for the rule. Only ACL matches performed by
software are counted.
The field appears as long as one match is found.
The description of ACL rule 5 is "This rule is used in eth 1."
2107