Rule Comment (For Ipv6) - H3C MSR 20-20 Command Reference Manual

Description
Example

rule comment (for IPv6)

Syntax
View
Parameter
Description
Table 558 ICMPv6 messages definable in simple IPv4 ACL rules
ICMPv6 message
neighbor-advertisement
neighbor-solicitation
network-unreachable
packet-too-big
port-unreachable
router-advertisement
router-solicitation
unknown-ipv6-opt
unknown-next-hdr
Use the command to create an IPv6 ACL rule.
rule
Use the undo rule
rule.
With the undo rule command, if no parameters are specified, the entire ACL rule
is removed; if other parameters are specified, only the involved information is
removed.
n
Support for this command varies by device.
# Create a rule in IPv6 ACL 10000 to match the TCP RST packets with the source
address of 2200::100/64.
<Sysname> system-view
[Sysname] acl ipv6 number 10000
[Sysname-acl6-simple-10000] rule tcp addr-flag 4 source 2200::100/64
tcp-type tcprst
rule rule-id comment text
undo rule rule-id comment
Basic IPv6 ACL view, advanced IPv6 ACL view
rule-id: IPv6 ACL rule number in the range 0 to 65534.
text: IPv6 ACL rule description, a case-sensitive string of 1 to 127 characters.
Use the rule comment
existing IPv6 ACL rule, for example to describe the purpose of the ACL rule or its
attributes.
Use the
undo rule comment
ICMPv6 TYPE
Type=136
Type=135
Type=1
Type=2
Type=1
Type=134
Type=133
Type=4
Type=4
command to remove an IPv6 ACL rule or parameters from the
command to create or modify a description for an
command to remove the IPv6 ACL rule description.
2115
ICMPv6 CODE
Code=0
Code=0
Code=0
Code=0
Code=4
Code=0
Code=0
Code=2
Code=1