H3C MSR 20-20 Command Reference Manual page 2111

Table 552 TCP/UDP-specific match criteria for advanced IPv6 ACL rules
Parameter Function
source-port Defines the source
operator port1 port in the UDP/TCP
[ port2 ] packet.
destination-port Defines the
operator port1 destination port in the
[ port2 ] UDP/TCP packet.
If the protocol argument is set to ICMPv6, you may define the parameters in the
following table.
Table 553 ICMPv6-specific match criteria for advanced IPv6 ACL rules
Parameter Function
icmpv6-type Specifies the
{ icmpv6-type ICMPv6
icmpv6-code | message type
icmpv6-message } and code
The following table provides the ICMPv6 messages that you can specify in
advanced IPv6 ACL rules.
Table 554 Available ICMPv6 messages
ICMPv6 message
redirect
echo-request
echo-reply
err-Header-field
frag-time-exceeded
hop-limit-exceeded
host-admin-prohib
host-unreachable
Description
The operator argument can be lt (lower than),
gt (greater than), eq (equal to), or range
(inclusive range).
The port1 and port2 arguments each specify a
TCP or UDP port, represented by a number in
the range 0 to 65535. TCP port number can
be represented in words as follows:
chargen (19), bgp (179), cmd (514), daytime
(13), discard (9), domain (53), echo (7), exec
(512), finger (79), ftp (21), ftp-data (20),
gopher (70), hostname (101), irc (194),
klogin (543), kshell (544), login (513), lpd
(515), nntp (119), pop2 (109), pop3 (110),
smtp (25), sunrpc (111), tacacs (49), talk
(517), telnet (23), time (37), uucp (540),
whois (43), or www (80).
UDP port number can be represented in words
as follows: biff (512), bootpc (68), bootps
(67), discard (9), dns (53), dnsix (90), echo
(7), mobilip-ag (434), mobilip-mn (435),
nameserver (42), netbios-dgm (138),
netbios-ns (137), netbios-ssn (139), ntp
(123), rip (520), snmp (161), snmptrap (162),
sunrpc (111), syslog (514), tacacs-ds (65),
talk (517), tftp (69), time (37), who (513),
xdmcp (177).
Description
The icmpv6-type argument ranges from 0 to 255.
The icmpv6-code argument ranges from 0 to 255.
The icmpv6-message argument specifies a message
name. For available ICMPv6 messages, see Table 553
Type
137
128
129
4
3
3
1
1
2111
Code
0
0
0
0
1
0
1
3