Freescale Semiconductor MPC8313E Family Reference Manual page 771

Bits Name
6 THLT6 Transmit halt of ring 6. Set by the eTSEC if is no longer processing transmit frames from this TxBD ring, and
DMA from this ring is disabled. To re-start transmission from this TxBD ring, this bit must be cleared by writing
1 to it. This bit is set only on a general error condition (as in IEVENT[TXE]), regardless of TQUEUE[EN6], or
if no ready TxBDs can be fetched. DMACTRL[GTS] being set by the user does not cause this bit to be set.
Software should examine the halted queue's buffer descriptors for repeatable error conditions before taking
it out of the halt state. Failure to do so may cause an effective livelock, in which the error condition recurs and
halts all queues again.
Repeatable error conditions which cause halt include:
Bus error:
• Invalid BD or data address
• Uncorrectable error on BD or data read
TxBD programming errors:
• Ready=1 and length=0
7 THLT7 Transmit halt of ring 7. Set by the eTSEC if is no longer processing transmit frames from this TxBD ring, and
DMA from this ring is disabled. To re-start transmission from this TxBD ring, this bit must be cleared by writing
1 to it. This bit is set only on a general error condition (as in IEVENT[TXE]), regardless of TQUEUE[EN7], or
if no ready TxBDs can be fetched. DMACTRL[GTS] being set by the user does not cause this bit to be set.
Software should examine the halted queue's buffer descriptors for repeatable error conditions before taking
it out of the halt state. Failure to do so may cause an effective livelock, in which the error condition recurs and
halts all queues again.
Repeatable error conditions which cause halt include:
Bus error:
• Invalid BD or data address
• Uncorrectable error on BD or data read
TxBD programming errors:
• Ready=1 and length=0
8–15 — Reserved
16 TXF0 Transmit frame event occurred on ring 0. Set by the eTSEC if IEVENT[TXF] was set in relation to transmitting
a frame from this ring.
17 TXF1 Transmit frame event occurred on ring 1. Set by the eTSEC if IEVENT[TXF] was set in relation to transmitting
a frame from this ring.
18 TXF2 Transmit frame event occurred on ring 2. Set by the eTSEC if IEVENT[TXF] was set in relation to transmitting
a frame from this ring.
19 TXF3 Transmit frame event occurred on ring 3. Set by the eTSEC if IEVENT[TXF] was set in relation to transmitting
a frame from this ring.
20 TXF4 Transmit frame event occurred on ring 4. Set by the eTSEC if IEVENT[TXF] was set in relation to transmitting
a frame from this ring.
21 TXF5 Transmit frame event occurred on ring 5. Set by the eTSEC if IEVENT[TXF] was set in relation to transmitting
a frame from this ring.
22 TXF6 Transmit frame event occurred on ring 6. Set by the eTSEC if IEVENT[TXF] was set in relation to transmitting
a frame from this ring.
MPC8313E PowerQUICC II Pro Integrated Processor Family Reference Manual, Rev. 3
Freescale Semiconductor
Table 15-17. TSTAT Field Descriptions (continued)
Enhanced Three-Speed Ethernet Controllers
Description
15-41