Freescale Semiconductor MPC8313E Family Reference Manual page 975

Powerquicc ii pro integrated processor
Hide thumbs Also See for MPC8313E:
Table of Contents

Advertisement

Bits
Name
20
BSEIS
B session end interrupt status. Set when VBus has fallen below the B session end threshold.
Software must write a one to clear this bit.
19
BSVIS
B session valid interrupt status. Set when VBus has either risen above or fallen below the B session valid
threshold (0.8 VDC).
Software must write a one to clear this bit.
18
ASVIS
A session valid interrupt status. Set when VBus has either risen above or fallen below the A session valid
threshold (0.8 VDC).
Software must write a one to clear this bit.
17
AVVIS
A VBus valid interrupt status. Set when VBus has either risen above or fallen below the VBus valid threshold
(4.4 VDC) on an A device.
Software must write a one to clear this bit.
16
IDIS
USB ID interrupt status. Set when a change on the ID input has been detected.
Software must write a one to clear this bit.
15
Reserved, should be cleared.
14
DPS
Data bus pulsing status
1 Pulsing detected on port
0 No pulsing on port
13
1msT
1 millisecond timer toggle. This bit toggles once per millisecond.
12
BSE
B session end
1 VBus is below the B session end threshold.
0 VBus is above the B session end threshold.
11
BSV
B session valid
1 VBus is above the B session valid threshold.
0 VBus is below the B session valid threshold.
10
ASV
A session valid
1 VBus is above the A session valid threshold.
0 VBus is below the A session valid threshold.
9
AVV
A VBus valid
1 VBus is above the A VBus valid threshold.
0 VBus is below the A VBus valid threshold.
8
ID
USB ID
1 B device
0 A device
7–5
Reserved, should be cleared.
4
DP
Data pulsing
1 The pullup on DP is asserted for data pulsing during SRP.
0 The pullup on DP is not asserted.
3
OT
OTG termination. This bit must be set when the OTG device is in device mode.
1 Enable pulldown on DM
0 Disable pulldown on DM
2
Reserved, should be cleared.
MPC8313E PowerQUICC II Pro Integrated Processor Family Reference Manual, Rev. 3
Freescale Semiconductor
Table 16-24. OTGSC Register Field Descriptions (continued)
Description
Universal Serial Bus Interface
16-33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpc8313

Table of Contents