Freescale Semiconductor MPC8313E Family Reference Manual page 400

DDR Memory Controller
Figure 9-1 is a high-level block diagram of the DDR memory controller with its associated interfaces.
Section 9.5, "Functional Description,"
Request from
master
Address
Decode
Address from
master
CSB
Data from
SDRAM
Data from
master
9.2 Features
The DDR memory controller includes these distinctive features:
• Support for DDR2 and DDR SDRAM
• 32-bit SDRAM, 16-bit SDRAM for DDR and DDR2 and
• Programmable settings for meeting all SDRAM timing parameters
• Support for the following SDRAM configurations:
— As many as two physical banks (chip selects), each bank independently addressable
– 64-Mbit to 4-Gbit devices depending on internal device configuration with ×8/×16/×32 data
ports (no direct ×4 support)
— Unbuffered and registered DRAM modules
• Open page management (dedicated entry for each logical bank)
• Automatic DRAM initialization sequence or software-controlled initialization sequence
• Automatic DRAM data initialization
MPC8313E PowerQUICC II Pro Integrated Processor Family Reference Manual, Rev. 3
9-2
contains detailed figures of the controller.
Row
Open
Table
Figure 9-1. DDR Memory Controller Simplified Block Diagram
Address
Control
SDRAM
Control
Delay chain
FIFO
SDRAM
Control
Clock
Control
DDR SDRAM
Memory Array
MA[14:0]
MBA[0:2]
DDR SDRAM
Memory Control
MCS[0:1]
MCAS
MRAS
MWE
MDM[0:3]
MCKE
MODT[0:1]
EN
Data Qualifiers
MDQS[0:3]
Data Signals
MDQ[0:31]
EN
Clocks
MCK
MCK
Freescale Semiconductor