Freescale Semiconductor MPC8313E Family Reference Manual page 1230

Revision History
10.5.7, 10-102
11.4.1, 11-3
12.2, 12-2
12.3.1, 12-3
12.3.2, 12-5
12.3.8.1, 12-11
11–10 PRC PCI read command. This field indicates the type of PCI read command to use.
00 Reserved
01 PCI read line
10 PCI read multiple
11 Reserved
13.3, 13-11
13.3.2.11, 13-23
13.3.2.11, 13-23
13.3.2.12, 13-24
13.3.3, 13-25
14.2, 14-9
14.6.4.5, 14-74
14.6.4.5, 14-74
MPC8313E PowerQUICC II Pro Integrated Processor Family Reference Manual, Rev. 3
A-52
may not be able to sample the correct data during reads. Therefore, OE must be
asserted earlier than TA.
Deleted Sections, 10.5.7, 10.5.7.1, and 10.5.7.1.1. Deleted Table 10-48 and
Figures 10-80 through 10-82.
Table 11-2, in TA bit field description, added the following sentence: 'The
translation address must be aligned based on the window's size.'
Table 12-1, in 0x0_8030 row, Access column, changed to Mixed.
Figure 12-2, changed Access to 'mixed'.
First paragraph, second sentence changed to read:
OMIMR can be read from the CSB or the PCI bus, but it can be written only from
the PCI bus.
In Table 12-10, changed bits 11-10 row to the following:
In Tables 13-4 and 13-5 added a 'Reset' column.
In the first paragraph, added the following:
Inbound and outbound windows for the same bus should not overlap. Therefore,
situations where an inbound window translation points back into an outbound
window, or where an outbound translation window points back into an inbound
window, are not allowed.
In Table 13-18, in the Description column for the TA bit added the following
sentence:
The specified address must be aligned to the window size, as defined by
PIWARn[IWS].
In Table 13-19, in the Description column for the BA bit added the following
sentence:
The specified address must be aligned to the window size, as defined by
PIWARn[IWS].
In Table 13-22, updated RID value from 10 to 21.
In Table 14-3, changed the 'Section' column to 'Section/Page' and added the page
numbers.
In the first paragraph, second sentence changed to read:
The value of ID is always 0x0000_0000_0002_00A0, indicating that this is the
first version of the SEC 2.2.
In Figure 14-45, changed the Reset value to: 0x0000_0000_0002_00A0.
Freescale Semiconductor