Freescale Semiconductor MPC8313E Family Reference Manual page 903

RQCTRL Fields
Table
Entry
GPI CLE REJ AND
0 0 1 0
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
6 0 1 0
7 0 1 0
8 0 0 0
9 0 0 0
10 0 0 0
11 0 1 0
12 0 0 0
15.6.4.2.9 Filer Example—Interrupt from Deep Sleep
The example in Table 15-158
packets arrive:
• ARP packet with Target IP address matching either of two IP addresses (either static or link local
address)
• IPv4/UDP multicast DNS query
• IPv4/UDP SNMP broadcast query
These packets are also be stored in memory. All other packets are dropped.
RQCTRL Fields
Table
Entry
GPI CLE REJ AND
0 0 0 0
1 0 1 0
2 0 0 0
MPC8313E PowerQUICC II Pro Integrated Processor Family Reference Manual, Rev. 3
Freescale Semiconductor
Table 15-157. Filer Table Example—TCP and UDP Port Filing
Q CMP PID
1 000_000 00 1011
1 000_000 01 1111
0 000_010 11 1111
0 000_011 00 1111
0 000_000 00 1111
0 000_000 00 1111
0 000_001 01 0000
1 000_000 00 1011
0 000_101 00 1111
0 000_111 00 1111
0 000_110 00 1111
0 000_100 01 0000
0 000_000 01 0000
shows how the filer can facilitate exit from deep sleep if any of the following
Table 15-158. Filer Example—Interrupt from Deep Sleep
Q CMP PID
0 000_000 11 0000
1 000_000 00 0001
0 000_000 11 0000 0xFFFF_FFFF ARP Cluster: Set Mask to unmask everything
Enhanced Three-Speed Ethernet Controllers
RQPROP
0x0000_0006 Enter cluster if layer 4 is TCP
0x0000_0014 AND rule—FTP from TCP ports 20
and 21: file to ring 2
0x0000_0016
0x0000_0017 telnet from TCP port 23: file to ring 3
empty entry reserved for future use
All zeros
All zeros empty entry reserved for future use
All zeros end cluster; default TCP: file to ring 1
0x0000_0011 Enter cluster if layer 4 is UDP
0x0000_0801 NFS from UDP port 2049
0x0000_0208 Route from UDP port 520
0x0000_0045 TFTP from UDP port 69
All zeros End cluster; default UDP: file to ring 4
All zeros By default, file to ring 0
RQPROP
0x0001_0000 Check for ARP request; set mask register to mask
off everything but the ARP request flag.
0x0001_0000 Check to see if ARP request flag is set by doing a
=1 comparison. Enter the "ARP Request Cluster" if
true.
(Reset mask to all F's)
Comment
0x0000_028B
0x0000_00AF
0x0000_086F
0x0000_0C0F
0x0000_000F
0x0000_000F
0x0000_0620
0x0000_028B
0x0000_140F
0x0000_000F
0x0000_180F
0x0000_1220
0x0000_0020
Comment
RQCTRL
Word
15-173