Extended-Authentication - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

extended-authentication

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
extended-authentication { none | pap | chap } [ re-authenticate ]
[ skip-peer-config ]
no extended-authentication
Command introduced in JunosE Release 7.3.0.
Specifies the extended user authentication protocol for use during the extended user
authentication protocol exchange. The re-authenticate keyword enables the
reauthentication option (a second authentication procedure). The skip-peer-config
keyword disables the router from configuring peer IP characteristics. The no version
restores the default protocol, pap.
none—Specifies that no extended authentication is performed
pap—Specifies the use of PAP protocol for extended authentication
chap—Specifies the use of CHAP protocol for extended authentication
re-authenticate—Enables reauthentication when IKE SA rekeying occurs
skip-peer-config—Disables configuration of peer IP characteristics
IPSec Tunnel Profile Configuration
Chapter 6: E Commands
617