extended-authentication
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
extended-authentication { none | pap | chap } [ re-authenticate ]
[ skip-peer-config ]
no extended-authentication
Command introduced in JunosE Release 7.3.0.
Specifies the extended user authentication protocol for use during the extended user
authentication protocol exchange. The no version restores the default protocol, pap.
none—Specifies that no extended authentication is performed
pap—Specifies the use of PAP protocol for extended authentication
chap—Specifies the use of CHAP protocol for extended authentication
re-authenticate—Enables reauthentication when IKE SA rekeying occurs
skip-peer-config—Disables configuration of peer IP characteristics
IPSec Tunnel Profile Configuration
Chapter 6: E Commands
617