Extended-Authentication - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

extended-authentication

extended-authentication { none | pap | chap } [ re-authenticate ]
Syntax
[ skip-peer-config ]
no extended-authentication
Command introduced in JUNOSe Release 7.3.0.
Release Information
Specifies the extended user authentication protocol for use during the extended user
Description
authentication protocol exchange. The re-authenticate keyword enables the
reauthentication option (a second authentication procedure). The skip-peer-config
keyword disables the router from configuring peer IP characteristics. The no version
restores the default protocol, pap.
Options
IPSec Tunnel Profile Configuration
Mode
none Specifies that no extended authentication is performed
pap Specifies the use of PAP protocol for extended authentication
chap Specifies the use of CHAP protocol for extended authentication
re-authenticate Enables reauthentication when IKE SA rekeying occurs
skip-peer-config Disables configuration of peer IP characteristics
Chapter 6: E Commands
extended-authentication
605