Set Admission-Bandwidth - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

set admission-bandwidth

Syntax
Release Information
Description
Options
Mode
472
set admission-bandwidth { bandwidthValue | adaptive }
no set admission-bandwidth
Command introduced in JunosE Release 7.1.0.
adaptive keyword added in JunosE Release 7.2.0.
Sets a specific multicast bandwidth for admission control or defines the bandwidth as
adaptive (automatically sensed). The no version removes the set clause from a route
map.
bandwidthValue—Number in the range 0–4294967259 kilobits per second used for
admission control
adaptive—Defines the admission bandwidth as being automatically sensed
Route Map Configuration
Copyright © 2010, Juniper Networks, Inc.