Set Admission-Bandwidth - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

set admission-bandwidth

set admission-bandwidth { bandwidthValue | adaptive }
Syntax
no set admission-bandwidth
Command introduced in JUNOSe Release 7.1.0.
Release Information
adaptive keyword added in JUNOSe Release 7.2.0.
Sets a specific multicast bandwidth for admission control or defines the bandwidth
Description
as adaptive (automatically sensed). The no version removes the set clause from a
route map.
Options
Route Map Configuration
Mode
468
set admission-bandwidth
bandwidthValue Number in the range 0–4294967259 kilobits per second used
for admission control
adaptive Defines the admission bandwidth as being automatically sensed