Configuring Virus Signature Version Monitoring And Patch Assessment; Procedure); Configuring Virus Signature Version Monitoring And Patch Assessment (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Configuring Virus Signature Version Monitoring and Patch Assessment (NSM Procedure)

158
When creating the policies, you must define the policy name, and either enable predefined
rules or create custom rules that run the specified checks. Optionally, you can specify
how Host Checker should evaluate multiple rules within a single policy.
To create a standard client-side policy:
In the NSM navigation tree, select Device Manager> Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to create a standard client-side policy.
Click the Configuration tab. In the configuration tree, select Authentication > Endpoint
3.
Security > Host Checker.
Under Policies, click the Add button.
4.
Enter a policy name and select a policy type.
5.
Create one or more rules to associate with the policy.
6.
Click one:
7.
OK—Saves the changes.
Cancel—Cancels the modifications.
Configuring Advanced Endpoint Defense Policy (NSM Procedure) on page 157
Specifying Customized Requirements Using Custom Rules (NSM Procedure) on page 161
Remediating Infranet Controller Host Checker Policies on page 174
Configuring Infranet Controller Host Checker Access Restrictions (NSM Procedure) on
page 67
You can configure Host Checker to monitor and verify that the virus signatures, operating
systems, software versions, and patches installed on client computers are up to date,
and remediate those endpoints that do not meet the specified criteria.
To configure the Infranet Controller to automatically import the current virus signature
version monitoring and patch management version from the Juniper Networks staging
site:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure virus signature version monitoring and patch assessment.
Click the Configuration tab. In the configuration tree, select Authentication > Endpoint
3.
Security > Host Checker > Live Update Settings.
Add or modify settings as specified in Table 50 on page 159.
4.
Click one:
5.
Copyright © 2010, Juniper Networks, Inc.