Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide A to M
ipv6 mld ssm-map static
Syntax
Release Information
Description
Options
Mode
1048
[ no ] ipv6 mld ssm-map static accessListName sourceAddress
Command introduced before JunosE Release 7.1.0.
Specifies an access list and source address for use in SSM mapping. SSM mapping
statically assigns sources to MLDv1 groups. You must use SSM mapping for MLDv1 hosts
to interoperate with PIM SSM. SSM mapping allows the router to use a statically
configured list to translate <*,G> memberships to <S,G> memberships. The no version
removes the SSM map association.
NOTE: To operate correctly, the static source addresses configured with the
ipv6 mld ssm-map static command must fall within the configured PIM SSM
range.
accessListName—Name of the access control list
sourceAddress—Address of the source
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
