Ipv6 Mld Query-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 mld query-interval

Syntax
Release Information
Description
Options
Mode
1044
ipv6 mld query-interval seconds
no ipv6 mld query-interval
Command introduced before JunosE Release 7.1.0.
Sets how often the router sends MLD host-query packets from this interface. The no
version restores the default value, 125 seconds.
seconds—Polling interval in the range 0–65535 seconds
Interface Configuration, Profile Configuration
Copyright © 2010, Juniper Networks, Inc.