Display Ip Statistics - H3C S5120-SI Series Command Reference Manual

sndbuf = 4194304, rcvbuf = 4194304, sb_cc = 0, rb_cc = 0,
socket option = 0,
socket state = SS_PRIV SS_NBIO SS_ASYNC
Table 1-3 display ip socket command output description
Field
SOCK_STREAM
SOCK_DGRAM
SOCK_RAW
Task
socketid
Proto
LA
FA
sndbuf
rcvbuf
sb_cc
rb_cc
socket option
socket state

display ip statistics

Syntax
display ip statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ip statistics command to display statistics of IP packets.
Related commands: display ip interface in IP Addressing Commands; reset ip statistics.
Examples
# Display statistics of IP packets.
TCP socket
UDP socket
Raw IP socket
Task number
Socket ID
Protocol number of the socket, indicating the protocol type that IP carries
Local address and local port number
Remote address and remote port number
Sending buffer size of the socket, in bytes
Receiving buffer size of the socket, in bytes
Current data size in the sending buffer (It is available only for TCP that can
buffer data)
Data size currently in the receiving buffer
Socket option
Socket state
1-8
Description