Aps Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

aps group

aps group groupName
Syntax
no aps group
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns an interface to an APS/MSP group. The no version removes a group of
Description
APS/MSP interfaces.
Options
Controller Configuration
Mode
groupName—Name of the APS/MSP group to which the active and standby
interfaces belong; string of up to 32 characters
Chapter 2: A Commands
117
aps group