Ethernet Oam Lfm Remote-Loopback Supported - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

ethernet oam lfm remote-loopback supported

Syntax
Release Information
Description
Options
Mode
Related Topics
590
[ no ] ethernet oam lfm remote-loopback supported
Command introduced in JunosE Release 11.1.0.
Configures Ethernet OAM remote loopback functionality on an interface and causes the
interface to receive and respond to remote loopback requests from peers. The no version
disables the remote loopback behavior on the interface, which is the default behavior.
remote-loopback—Configures a local interface to be placed into remote loopback
mode and enables the local interface to respond to remote loopback requests that it
receives from a peer OAM entity
supported—Enables the Ethernet OAM configuration on the interface to initiate remote
loopback or respond to a remote loopback request it receives from a peer
Interface Configuration
OAM Remote and Local Loopback Feature
ethernet oam lfm remote-loopback on page 589
Configuring 802.3ah OAM Link-Fault Management
Example: Enabling Remote Loopback Support on the Local Interface
Copyright © 2010, Juniper Networks, Inc.