Append-After - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

append-after

append-after indexNumber next-address ipAddress [ [ mask ] ipMask ] [ loose ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Adds a next hop after a particular index in the MPLS explicit path. The sequence
Description
numbers for existing hops after the index adjust automatically. There is no no version.
Options
Explicit Path Configuration
Mode
indexNumber Number of a node in an ordered set of abstract nodes
ipAddress Address of the next hop
ipMask [ not currently used ] mask for the next adjacent address
loose Indicates the node is not necessarily directly connected (adjacent) to the
previous node in the path. If loose is not configured, the configuration defaults
to strict. Strict indicates that the node is directly connected to the previous node.
Chapter 2: A Commands
113
append-after