Address Retransmit-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

address retransmit-interval

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
Syntax
retransmit-interval retransInterval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the time between LSA retransmissions for the interface when an
Description
acknowledgment for the LSA is not received. The no version restores the default
value.
NOTE: You must issue the address area command before issuing this command.
Options
Router Configuration
Mode
104
address retransmit-interval
ipAddress OSPF interface address previously specified with the address
command
unnumbered Indicates that OSPF is running on an unnumbered interface
previously specified with the address command
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
retransInterval Number in the range 0–3600 seconds; default value is 5 seconds