Application - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

application

application applicationType1 [ applicationType2 [ applicationType3 ] ]
Syntax
no application
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the type of application that is secured by connections created with this
Description
IPSec transport profile. You can specify multiple application types. The no version
restores the default application, L2TP.
Options
IPSec Transport Profile Configuration
Mode
114
application
applicationType One of the following application types:
dvmrp Secures DVMRP traffic.
gre Secures GRE traffic.
l2tp Secures L2TP traffic; this is the default application
l2tp-nat-passthrough Secures L2TP traffic and also allows clients to connect
from behind NAT devices that support IPSec passthrough