Aps Unidirectional - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

aps unidirectional

[ no ] aps unidirectional
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the APS/MSP group to operate in unidirectional mode, the default setting.
Description
The no version configures the APS/MSP group to operate in bidirectional mode.
Controller Configuration
Mode
122
aps unidirectional