Aps Working - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

aps working

aps working [ 1 ]
Syntax
no aps working
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures an interface as a working interface. The no version removes the
Description
configuration.
Options
Controller Configuration
Mode
1 Channel number that identifies the working interface; because the working
interface is always assigned channel number 1, this is the only valid option
Chapter 2: A Commands
123
aps working