Timer Loop; Timer Wait - H3C s3600 series Command Manual

timer loop

Syntax
timer loop interval
undo timer loop
View
Detected group view
Parameters
seconds: Detecting interval. This argument ranges form 1 to 86,400 (in seconds) and defaults to 15.
Description
Use the timer loop command to set the detecting interval, that is, the frequency to perform auto detect
operations.
Use the undo timer loop command to restore the default.
By default, auto detect operations are performed on all detected groups every 15 seconds.
Examples
# Set the detecting interval to 60 seconds for detected group 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] detect-group 10
[Sysname-detect-group-10] timer loop 60

timer wait

Syntax
timer wait seconds
undo timer wait
View
Detected group view
Parameters
seconds: Timeout waiting for an ICMP reply. This argument ranges from 1 to 30 (in seconds) and
defaults to 2.
Description
Use the timer wait command to set a timeout waiting for an ICMP reply.
Use the undo timer wait command to restore the default.
By default, timeout waiting for an ICMP reply in an auto detect operation is 2 seconds.
Examples
# Set a timeout of 3 seconds waiting for an ICMP reply in detected group 10.
1-7