Client-Verify Enable; Close-Mode Wait - H3C S5120-SI Series Command Reference Manual

client-verify enable

Syntax
client-verify enable
undo client-verify enable
View
SSL server policy view
Default Level
2: System level
Parameters
None
Description
Use the client-verify enable command to enable certificate-based SSL client authentication, that is, to
enable the SSL server to authenticate the client by the client's certificate during the SSL handshake
process.
Use the undo client-verify enable command to restore the default.
By default, certificate-based SSL client authentication is disabled.
Related commands: display ssl server-policy.
Examples
# Enable certificate-based SSL client authentication.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1] client-verify enable

close-mode wait

Syntax
close-mode wait
undo close-mode wait
View
SSL server policy view
Default Level
2: System level
Parameters
None
1-2