Display Bgp Routing-Table - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between
advertisement runs
Optional capabilities
Peer Preferred Value
Routing policy configured

5.1.20 display bgp routing-table

Syntax
display bgp routing-table [ ip-address [ { mask | mask-length } [ longer-prefixes ] ] ]
View
Any view
Parameters
ip-address: Destination IP address.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-prefixes: Matches the longest prefix.
Description
Use the display bgp routing-table command to display specified BGP routing
information in the BGP routing table.
Examples
# Display BGP routing table information.
<Sysname> display bgp routing-table
Total Number of Routes: 1
Field
5-19
Chapter 5 BGP Configuration Commands
Description
Routes are advertised and received in the form
of IPv4 unicast
Total numbers of received packets and updates
Total numbers of sent packets and updates
Maximum allowed prefix number
Threshold value
Minimum time between route advertisements
Optional capabilities enabled by the peer
Preferred value specified for the routes from the
peer
Local routing policy