Dialer Priority; Dialer Queue-Length - H3C MSR 20-20 Command Reference Manual

322 C 20: DCC C
HAPTER
Related command:
Example

dialer priority

Syntax
View
Parameter
Description
Related command:
Example

dialer queue-length

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
dialer route.
# Set the dial string for placing calls to 11111 on interface Dialer1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] dialer number 11111
dialer priority priority
undo dialer priority
Dial interface (physical) view
priority: Priority of the physical interface in a dialer circular group, in the range 1 to
127.
Use the
dialer priority
its dialer circular group in C-DCC approach.
Use the undo dialer priority
By default, the priority of a physical interface in its dialer circular group is 1.
This command sets the order in which the available physical interfaces in a dialer
circular group are used. The physical interface with higher priority is used first.
dialer circular-group.
# Set the priority of interface Serial 2/0 in dialer circular group 0 to 5.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] dialer circular-group 1
[Sysname-Serial2/0] dialer priority 5
dialer queue-length packets
undo dialer queue-length
Dial interface (physical or dialer) view
packets: Number of packets that can be buffered on the interface, in the range 1
to 100.
command to assign a priority to the physical interface in
command to restore the default.