Port-Based Vlan Configuration Commands; Display Port - H3C MSR Series Command Reference Manual

Port-based VLAN configuration commands

display port

Use display port to display information about the hybrid or trunk ports on the device, including the
port names, PVIDs, and allowed VLAN IDs.
Syntax
display port { hybrid | trunk } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
hybrid: Displays hybrid ports.
trunk: Displays trunk ports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the hybrid ports in the system.
<Sysname> display port hybrid
Interface
Eth1/4
# Display information about the trunk ports in the system.
<Sysname> display port trunk
Interface
Eth1/8
Table 6 Command output
Field
Interface
PVID
VLAN passing
Tagged
Untagged
PVID VLAN passing
100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
PVID VLAN passing
2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Description
Port name.
Port VLAN ID.
VLANs for which the port allows packets to pass through.
VLANs for which the port sends packets without removing VLAN tags.
VLANs for which the port sends packets after removing VLAN tags.
25