Dlsw Reverse; Dlsw Max-Transmission - H3C MSR 20-20 Command Reference Manual

348 C 21: B
HAPTER ASIC

dlsw reverse

Syntax
View
Parameter
Description
Related command:
Example

dlsw max-transmission

Syntax
View
Parameter
DLS C C
W ONFIGURATION OMMANDS
dlsw reverse mac-address
System view
mac-address: MAC address to be converted.
Use the
dlsw reverse
format to the token ring format, or vice versa.
When specifying an SDLC peer MAC address for an SDLC virtual circuit, pay
attention to the following situations:
If the remote SNA device uses a token ring address, specify its MAC address
■
directly.
If the remote SNA device uses an Ethernet address, convert the Ethernet
■
address to a token ring address by using the dlsw reverse command. For
example, convert 00e0.fc03.a548 to 0007.3fc0.5a12.
If the remote SNA device uses an SDLC link, specify a compound MAC address,
■
in which the first five bytes are from the virtual MAC address configured in the
sdlc mac-map local command on the remote router, and the last byte is the
SDLC address of the local router.
sdlc mac-map remote.
# Convert the Ethernet format MAC address 0012-3578-4521 to the token ring
format.
<Sysname> system-view
[Sysname] dlsw reverse 0012-3578-4521
Reversed MAC address: 0048-ac1e-a284
# Convert the token ring MAC address 0048-ac1e-a284 to the Ethernet format.
[Sysname] dlsw reverse 0048-ac1e-a284
Reversed MAC address: 0012-3578-4521
dlsw max-transmission retries
undo dlsw max-transmission
System view
retries: The maximum number of attempts that the DLSw v2.0 router should make
to send an explorer frame. It ranges from 1 to 10 and defaults to 5.
command to convert a MAC address from the Ethernet