Display Dlsw Reachable-Cache - H3C MSR 20-20 Command Reference Manual

340 C 21: B
HAPTER ASIC

display dlsw reachable-cache

Syntax
View
Parameter
Description
Example
DLS C C
W ONFIGURATION OMMANDS
*145.11.23.58
00:00:00
Table 35 Description on the fields of the display dlsw remote command
Field
Remote peer type
Total peers number
IP address
frame-in
frame-out
frame-drop
port
type
state
lifetime
display dlsw reachable-cache
Any view
None
Use the
display dlsw reachable-cache
information of DLSw.
# Display the reachability information of DLSw.
<Sysname> display dlsw reachable-cache
LOCAL MAC addresses in cache
--------------------------------------------------------------------
MAC address
REMOTE MAC addresses in cache
--------------------------------------------------------------------
MAC address
0102-2103-5641
6500-7201-8160
2 1
Description
Type of the remote peer
D: the remote peer was dynamically learned
■
C: the remote peer was manually configured
■
Total number of remote peers
Remote peer IP address (if preceded by a *, this remote peer can
establish a connection; otherwise, this remote peer is inactive and
only serves as a backup)
Number of frames the local peer has received from this remote
peer
Number of frames the local peer has sent to this remote peer
Number of frames dropped due to errors while the local peer
sent/received frames to/from this remote peer
Port number for the TCP connection
2065: DLSw v1.0
■
2067: DLSw v2.0
■
Type of the remote peer
Status of the connection:
CONNECT: a TCP connection has been established
■
DISCONNECT: no TCP connection has been established
■
CONNECTING: a TCP connection is being established
■
Length of time for which the connection has been up
Status Interface
Status Peer
FOUND 2.2.2.2
FOUND 1.1.1.1
1 2067 C
command to view the reachability
Remain time
Type Remain time
DYNAMIC 15
CONFIG 15
CONNECTING