Reset Encrypt-Card Fast-Switch; Reset Ipsec Sa - H3C MSR 20-20 Command Reference Manual

2142 C 140: IPS
HAPTER EC

reset encrypt-card fast-switch

Syntax
View
Parameter
Description
Related command:
Example

reset ipsec sa

Syntax
View
Parameter
C C
ONFIGURATION OMMANDS
[Sysname] ipsec policy policy1 100 manual
[Sysname-ipsec-policy-manual-policy1-100] proposal prop1
reset encrypt-card fast-switch
User view
None
Use the
reset encrypt-card fast-switch
switching entries.
Note that:
This command clears all the fast switching entries. All IP fast switching entries
■
using the encryption card interface as the inbound interface or outbound
interface will also be cleared.
Once cleared by this command, the fast switching entries cannot be restored.
■
Some other actions or events can also clear encryption card fast switching
■
entries, such as disabling the encryption card, resetting the encryption card,
hot plugging the encryption card, unbinding a policy and clearing the SA.
display encrypt-card fast-switch.
# Clear all encryption card fast switching entries.
<sysname> reset encrypt-card fast-switch
reset ipsec sa [ parameters dest-address protocol spi | policy policy-name
[ seq-number ] | remote ip-address ]
User view
parameters dest-address protocol spi: Specifies the destination address, security
protocol and SPI (Security Parameter Index) of an SA.
dest-address: Destination address in dotted decimal notation.
protocol: Security protocol, which can be keyword ah or esp, case insensitive.
spi: Security parameter index in the range 256 to 4294967295.
policy: Specifies an IPSec policy.
command to clear encryption card fast