Display Ipsec Policy - H3C MSR 20-20 Command Reference Manual

display ipsec policy

Syntax
View
Parameter
Description
Related command:
Example
Table 559 Description on the fields of the display encrypt-card fast-switch command
Field
encrypt-card
Fast-Forwarding cache
Index
SourIP
SourPort
DestIP
DestPort
Prot
TdbID
ENC/DEC
display ipsec policy [ brief | name policy-name [ seq-number ] ]
Any view
brief: Displays brief information about all the IPSec policies.
name: Displays detailed information about a specified IPSec policy or IPSec policy
group.
policy-name: Name of the IPSec policy, a string of 1 to 15 characters.
seq-number: Sequence number of the IPSec policy, in the range 1 to 10000.
Use the display ipsec policy
policies.
Note that:
If you do not specify any keywords or parameters, the command displays
■
detailed information about all IPSec policies.
If you specify the name policy-name combination but leave the seq-number
■
argument, the command displays detailed information about the specified
IPSec policy group.
ipsec policy (system view).
# Display brief information about all IPSec policies.
<Sysname> display ipsec policy brief
IPsec-Policy-Name
------------------------------------------------------------------------
map-1
map-3
mappp1234567890-1
mappp5432167890-1
Description
Encryption card fast forwarding cache
Index number of the encryption card fast forwarding entry
Source IP address of the data flow
Source port number of the data flow
Destination IP address of the data flow
Destination port number of the data flow
Protocol number
Identification of the SA
Action on the data flow, encryption or decryption
command to display information about IPSec
Mode acl ike-peer name
isakmp 3000 peerr1234567890
template
isakmp 3000 peer
template
2121