Display Ipsec Policy-Template - H3C MSR 20-20 Command Reference Manual

display ipsec policy-template

Syntax
View
Parameter
Description
Related command:
Example
outbound ESP setting:
ESP spi: 65432 (0xff98)
ESP string-key:
ESP encryption hex key: 11223344556677889900aabbccddeeff1234567812345678
ESP authentication hex key: 11223344556677889900aabbccddeeff
Table 561 Description on the fields of the display ipsec policy command
Field
security data flow
proposal name
inbound/outbound ah/esp setting
tunnel local address
tunnel remote address
perfect forward secrecy
display ipsec policy-template [ brief | name template-name [ seq-number ] ]
Any view
brief: Displays brief information about all the IPSec policy templates.
name: Displays detailed information about a specified IPSec policy template or
IPSec policy template group.
template-name: Name of the IPSec policy template, a string of 1 to 15 characters.
seq-number: Sequence number of the IPSec policy template, in the range 1 to
10000.
Use the
display ipsec policy-template
IPSec policy templates.
Note that:
If you do not specify any keywords or parameters, the command displays
■
detailed information about all IPSec policy templates.
If you specify the name policy-name combination but leave the seq-number
■
argument, the command displays information about the specified IPSec policy
template group.
ipsec policy-template.
# Display brief information about all IPSec policy templates.
<Sysname> display ipsec policy-template brief
Policy-template-Name
Description
Access control list referenced by the IPSec
policy
Name of the proposal referenced by the
IPSec policy
AH/ESP settings in the inbound/outbound
direction, including the SPI and key
Local IP address of the tunnel
Remote IP address of the tunnel
Whether PFS is enabled.
command to display information about
acl Remote-Address
2123