Esp Authentication-Algorithm; Esp Encryption-Algorithm - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Related command:
Example

esp authentication-algorithm

Syntax
View
Parameter
Description
Related command:
Example

esp encryption-algorithm

Syntax
None
Use the
encrypt-card fast-switch
switching.
Use the
undo encrypt-card fast-switch
fast switching.
By default, encryption card fast switching is disabled.
display encrypt-card fast-switch.
# Enable encryption card fast switching.
<sysname> system-view
[sysname] encrypt-card fast-switch
esp authentication-algorithm { md5 | sha1 }
undo esp authentication-algorithm
IPSec proposal view
md5: Uses the MD5 algorithm, which uses a 128-bit key.
sha1: Uses the SHA1 algorithm, which uses a 160-bit key.
Use the
esp authentication-algorithm
algorithm for ESP.
Use the
undo esp authentication-algorithm
that ESP does not perform authentication of packets.
By default, the MD5 algorithm is used.
ipsec proposal, esp encryption-algorithm, proposal, and transform.
# Configure IPSec proposal prop1 to use ESP and SHA1.
<Sysname> system-view
[Sysname] ipsec proposal prop1
[Sysname-ipsec-proposal-prop1] transform esp
[Sysname-ipsec-proposal-prop1] esp authentication-algorithm sha1
esp encryption-algorithm { 3des | aes [ key-length ] | des }
command to enable encryption card fast
command to disable encryption card
command to specify the authentication
command to configure ESP so
2131