Ipsec Proposal - H3C MSR 20-20 Command Reference Manual

2138 C 140: IPS
HAPTER EC
Description
Related command:
Example

ipsec proposal

Syntax
View
Parameter
Description
Related command:
C C
ONFIGURATION OMMANDS
seq-number: Sequence number for the IPSec policy template, in the range 1 to
10000.
Use the ipsec policy-template
enter the IPSec policy template view.
Use the
undo ipsec policy-template
policy template(s).
By default, no IPSec policy template exists.
Note that:
Using the undo command without the seq-number argument deletes an IPSec
■
policy template group.
In an IPSec policy template group, an IPSec policy template with a smaller
■
sequence number has a higher priority.
display ipsec policy-template.
# Create an IPSec policy template with the name template1 and the sequence
number 100.
<Sysname> system-view
[Sysname] ipsec policy-template template1 100
[Sysname-ipsec-policy-template-template1-100]
ipsec proposal proposal-name
undo ipsec proposal proposal-name
System view
proposal-name: Name for the proposal, a case insensitive string of 1 to 15
characters.
Use the
ipsec proposal
Use the undo ipsec proposal
By default, no IPSec proposal exists.
Note that an IPSec proposal created by using the ipsec proposal command takes
the security protocol of ESP, the encryption algorithm of DES, and the
authentication algorithm of MD5 by default.
display ipsec proposal.
command to create an IPSec policy template and
command to delete the specified IPSec
command to create an IPSec proposal and enter its view.
command to delete an IPSec proposal.