Display Ipsec Tunnel - H3C MSR 20-20 Command Reference Manual

display ipsec tunnel

Syntax
View
Parameter
Description
Example
replay packet: 0
packet too long: 0
wrong SA: 0
Table 567 Description on the fields of the display ipsec statistics command
Field
input/output security packets
input/output security bytes
input/output dropped security
packets
dropped security packet detail
not enough memory
can't find SA
queue is full
authentication has failed
wrong length
replay packet
packet too long
wrong SA
display ipsec tunnel
Any view
None
Use the
display ipsec tunnel
# Display information about IPSec tunnels.
<Sysname> display ipsec tunnel
total tunnel : 1
------------------------------------------------
Connection ID : 3
Perfect forward secrecy: None
SA's SPI :
Inbound :
Outbound : 3562274487 (0xd453feb7) [ESP]
Tunnel :
Local Address:
Flow : (8 times matched)
Sour Addr : 44.44.44.0/255.255.255.0
Description
Number of inbound IPSec protected packets and number
of outbound IPSec protected packets
Number of inbound IPSec protected bytes and number of
outbound IPSec protected bytes
Number of inbound IPSec protected packets that are
discarded by the device and number of outbound IPSec
protected packets that are discarded by the device
Detailed information about inbound/outbound packets
that get dropped
Number of packets dropped due to lack of memory
Number of packets dropped due to finding no security
association
Number of packets dropped due to full queues
Number of packets dropped due to authentication failure
Number of packets dropped due to wrong packet length
Number of packets replayed
Number of packets dropped due to excessive packet
length
Number of packets dropped due to improper SA
command to display IPSec tunnel information.
187199087 (0xb286e6f) [ESP]
44.44.44.44 Remote Address : 44.44.44.55
2129
Port: 0 Protocol : IP