Reset Ip Routing-Table Statistics Protocol - H3C S3100-52P Command Manual

Command Manual – Static Route
H3C S3100-52P Ethernet Switch
**Destination: 2.2.2.0
For descriptions of route states, see
Table 1-5
Table 1-5 Description on the fields of the display ip routing-table verbose command
Holddown
Delete
Hidden

1.1.9 reset ip routing-table statistics protocol

Syntax
reset ip routing-table statistics protocol { all | protocol }
View
User view
Parameters
all: Specifies all protocols.
protocol: Specifies a protocol, which can be direct, or static.
Description
Use the reset ip routing-table statistics protocol command to clear the statistics of
routes in a routing table.
Examples
# Before executing the reset ip routing-table statistics protocol command, use the
display ip routing-table statistics command to display the routing statistics:
<Sysname> display ip routing-table statistics
Routing tables:
Proto
DIRECT
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42
Protocol: #DIRECT
*NextHop: 2.2.2.1
State: <Int ActiveU Retain Unicast>
Age: 20:08:05
lists the statistics of the routing table.
Field
route active
4 4
Cost: 0/0
Mask: 255.255.255.0
Preference: 0
Interface: 2.2.2.1(Vlan-interface2)
Cost: 0/0
Table 1-2.
Number of suppressed routes
Number of deleted routes
Number of hidden routes
added deleted
12 8
1-12
Chapter 1 IP Routing Table
Commands
Description