140
ah authentication-algorithm
Syntax
View
Parameter
Description
Related command:
Example
cryptoswitch fabric enable
Syntax
View
IPS
C
EC
ONFIGURATION
ah authentication-algorithm { md5 | sha1 }
undo ah authentication-algorithm
IPSec proposal view
md5: Uses MD5.
sha1: Uses SHA1.
Use the
ah authentication-algorithm
algorithm for the authentication header (AH) protocol.
Use the
undo ah authentication-algorithm
By default, MD5 is used.
Note that you need to use the transform command to specify the security
protocol as AH or both AH and ESP before specifying the authentication algorithm
for AH.
ipsec proposal and transform.
# Configure IPSec proposal prop1 to use AH and SHA1.
<Sysname> system-view
[Sysname] ipsec proposal prop1
[Sysname-ipsec-proposal-prop1] transform ah
[Sysname-ipsec-proposal-prop1] ah authentication-algorithm sha1
cryptoswitch fabric enable
undo cryptoswitch fabric enable
System view
C
OMMANDS
command to specify the authentication
command to restore the default.