Table of Contents
Advertisement
Section 15 A/D Converter
15.4.3
Input Sampling and A/D Conversion Time
The A/D converter has a built-in sample-and-hold circuit. The A/D converter samples the analog
input at a time t
after the ADST bit is set to 1, then starts conversion. Figure 15.5 shows the A/D
D
conversion timing. Table 15.4 indicates the A/D conversion time.
As indicated in figure 15.5, the A/D conversion time includes t
and the input sampling time. The
D
length of t
varies depending on the timing of the write access to ADCSR. The total conversion
D
time therefore varies within the ranges indicated in table 15.4.
In scan mode, the values given in table 15.4 apply to the first conversion. In the second and
subsequent conversions the conversion time is fixed at 128 states when CKS = 0 or 66 states when
CKS = 1.
Rev. 4.00 Jan 26, 2006 page 584 of 938
REJ09B0276-0400
Advertisement
Table of Contents
