Register Configuration - Renesas H8/3067 Series User Manual

Renesas 16-bit single-chip microcomputer
Hide thumbs Also See for H8/3067 Series:
Table of Contents

Advertisement

Section 3 MCU Operating Modes
Mode 5 is an externally expanded mode that enables access to external memory and peripheral
devices and also enables access to the on-chip ROM. Mode 5 supports a maximum address space
of 16 Mbytes.
Modes 6 and 7 are single-chip modes that operate using the on-chip ROM, RAM, and registers,
and makes all I/O ports available. Mode 6 supports a maximum address space of 64 kbytes. Mode
7 supports a maximum address space of 1 Mbyte.
The H8/3067 Group can be used only in modes 1 to 7. The inputs at the mode pins must select one
of these seven modes. The inputs at the mode pins must not be changed during operation.
3.1.2

Register Configuration

The H8/3067 Group has a mode control register (MDCR) that indicates the inputs at the mode
pins (MD
to MD
), and a system control register (SYSCR). Table 3.2 summarizes these registers.
2
0
Table 3.2
Registers
Address*
Name
H'EE011
Mode control register
H'EE012
System control register
Note: * Lower 20 bits of the address in advanced mode.
Rev. 4.00 Jan 26, 2006 page 64 of 938
REJ09B0276-0400
Abbreviation
R/W
MDCR
R
SYSCR
R/W
Initial Value
Undetermined
H'09

Advertisement

Table of Contents
loading

This manual is also suitable for:

H8/3067H8/3066H8/3065H8/3067rf

Table of Contents